L 30x20x4 Tecnometal Weight & Dimensions · 1.5 kg/m | Free Calculator

L 30x20x4 Tecnometal · Weight & Dimensions

Tecnometal, hot-rolled sections · Angle Section

Angle sections (L shapes) are used for bracing, connections, lintels, and built-up members. Available in equal and unequal leg configurations.

Put the L 30x20x4 Tecnometal in a real structure

Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.

Free, and it opens without signing up.
Also known as: RSA 30x20x4 (UK)

The L 30x20x4 steel profile weighs 1.5 kg/m (0.98 lb/ft), has a depth of 30 mm (1.18 in), flange width 20 mm (0.79 in). Cross-sectional area: 185.931 mm². Moment of inertia Ix = 1.614 cm⁴, Iy = 0.57 cm⁴.

h=30b=20t=4
Cross-section (not to scale)

Dimensions

PropertyMetricImperial
Depth (h)30 mm1.18 in
Width (b)20 mm0.79 in
Thickness (t)4 mm0.16 in
Fillet radius (r)3 mm0.12 in
Weight1.5 kg/m0.98 lb/ft

Section Properties

PropertyMetricImperial
Area (A)185.93 mm²0.288 in²
Moment of inertia (Ix)1.61 cm⁴0.04 in⁴
Moment of inertia (Iy)0.57 cm⁴0.01 in⁴
Elastic section modulus (Sx)0.82 cm³0.050 in³
Elastic section modulus (Sy)0.39 cm³0.024 in³
Plastic section modulus (Zx)1.23 cm³0.075 in³
Plastic section modulus (Zy)0.59 cm³0.036 in³
Radius of gyration (rx)0.93 cm0.367 in
Radius of gyration (ry)0.55 cm0.218 in

Beam Calculator— L 30x20x4

drag to orbit
mfixed @ 0mfixed @ 6m→kN/m

Results — L 30x20x4

Mmax

15.0 kN·m

Vmax

15.0 kN

δmax

5227.23 mm

L/1

R115.0 kN| 15.0 kN·mR215.0 kN| -15.0 kN·m
Standard:

Lose the fear of working in 3D

No installation, right in the browser — start now

Try the 3D Editor