Tecnometal, hot-rolled sections · Angle Section
Angle sections (L shapes) are used for bracing, connections, lintels, and built-up members. Available in equal and unequal leg configurations.
Put the L 200x90x15 Tecnometal in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The L 200x90x15 steel profile weighs 32.5 kg/m (21.85 lb/ft), has a depth of 200 mm (7.87 in), flange width 90 mm (3.54 in). Cross-sectional area: 4,173.285 mm². Moment of inertia Ix = 1,702.475 cm⁴, Iy = 224.063 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 200 mm | 7.87 in |
| Width (b) | 90 mm | 3.54 in |
| Thickness (t) | 15 mm | 0.59 in |
| Fillet radius (r) | 15 mm | 0.59 in |
| Weight | 32.5 kg/m | 21.85 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 4,173.29 mm² | 6.469 in² |
| Moment of inertia (Ix) | 1,702.47 cm⁴ | 40.90 in⁴ |
| Moment of inertia (Iy) | 224.06 cm⁴ | 5.38 in⁴ |
| Elastic section modulus (Sx) | 135.02 cm³ | 8.239 in³ |
| Elastic section modulus (Sy) | 31.8 cm³ | 1.941 in³ |
| Plastic section modulus (Zx) | 202.53 cm³ | 12.359 in³ |
| Plastic section modulus (Zy) | 47.7 cm³ | 2.911 in³ |
| Radius of gyration (rx) | 6.39 cm | 2.515 in |
| Radius of gyration (ry) | 2.32 cm | 0.912 in |
15.0 kN·m
15.0 kN
4.96 mm
L/1211