L 100x150x10 Tecnometal · Weight & Dimensions

Tecnometal, hot-rolled sections · Angle Section

Angle sections (L shapes) are used for bracing, connections, lintels, and built-up members. Available in equal and unequal leg configurations.

Also known as: RSA 100x150x10 (UK)

The L 100x150x10 steel profile weighs 19.0 kg/m (12.75 lb/ft), has a depth of 100 mm (3.94 in), flange width 150 mm (5.91 in). Cross-sectional area: 2,421.46 mm². Moment of inertia Ix = 202.636 cm⁴, Iy = 557.67 cm⁴.

Cross-section (not to scale)

Dimensions

Property	Metric	Imperial
Depth (h)	100 mm	3.94 in
Width (b)	150 mm	5.91 in
Thickness (t)	10 mm	0.39 in
Fillet radius (r)	10 mm	0.39 in
Weight	19.0 kg/m	12.75 lb/ft

Section Properties

Property	Metric	Imperial
Area (A)	2,421.46 mm²	3.753 in²
Moment of inertia (Ix)	202.64 cm⁴	4.87 in⁴
Moment of inertia (Iy)	557.67 cm⁴	13.40 in⁴
Elastic section modulus (Sx)	26.5 cm³	1.617 in³
Elastic section modulus (Sy)	54.84 cm³	3.347 in³
Plastic section modulus (Zx)	39.75 cm³	2.426 in³
Plastic section modulus (Zy)	82.27 cm³	5.020 in³
Radius of gyration (rx)	2.89 cm	1.139 in
Radius of gyration (ry)	4.8 cm	1.889 in