Tecnometal, welded sections (Brazil) · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 250x125x4.8x6.4 Tecnometal in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 250x125x4.8x6.4 steel profile weighs 21.5 kg/m (14.45 lb/ft), has a depth of 250 mm (9.84 in), flange width 125 mm (4.92 in). Cross-sectional area: 2,738.56 mm². Moment of inertia Ix = 2,908.016 cm⁴, Iy = 208.552 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 250 mm | 9.84 in |
| Width (b) | 125 mm | 4.92 in |
| Web thickness (tw) | 4.8 mm | 0.19 in |
| Flange thickness (tf) | 6.4 mm | 0.25 in |
| Weight | 21.5 kg/m | 14.45 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 2,738.56 mm² | 4.245 in² |
| Moment of inertia (Ix) | 2,908.02 cm⁴ | 69.87 in⁴ |
| Moment of inertia (Iy) | 208.55 cm⁴ | 5.01 in⁴ |
| Elastic section modulus (Sx) | 232.64 cm³ | 14.197 in³ |
| Elastic section modulus (Sy) | 33.37 cm³ | 2.036 in³ |
| Plastic section modulus (Zx) | 262.4 cm³ | 16.012 in³ |
| Plastic section modulus (Zy) | 51.37 cm³ | 3.135 in³ |
| Radius of gyration (rx) | 10.3 cm | 4.057 in |
| Radius of gyration (ry) | 2.76 cm | 1.086 in |
15.0 kN·m
15.0 kN
2.90 mm
L/2068