Tecnometal, cold-formed sections (Brazil) · Cold-formed Lipped Channel
Cold-formed lipped channels (C shapes) are lightweight profiles commonly used as purlins, girts, and light framing members. The stiffening lips increase local buckling resistance. Designed per AISI S100 and NBR 14762.
Put the C 127x50x17x1.52 Tecnometal in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The C 127x50x17x1.52 steel profile weighs 3.0 kg/m (2.01 lb/ft), has a depth of 127 mm (5.00 in), flange width 50 mm (1.97 in). Cross-sectional area: 381.52 mm². Moment of inertia Ix = 95.505 cm⁴, Iy = 13.56 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 127 mm | 5.00 in |
| Width (b) | 50 mm | 1.97 in |
| Thickness (t) | 1.5 mm | 0.06 in |
| Lip | 17 mm | 0.67 in |
| Fillet radius (r) | 1.5 mm | 0.06 in |
| Weight | 3.0 kg/m | 2.01 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 381.52 mm² | 0.591 in² |
| Moment of inertia (Ix) | 95.5 cm⁴ | 2.29 in⁴ |
| Moment of inertia (Iy) | 13.56 cm⁴ | 0.33 in⁴ |
| Elastic section modulus (Sx) | 15.04 cm³ | 0.918 in³ |
| Elastic section modulus (Sy) | 3.99 cm³ | 0.244 in³ |
| Plastic section modulus (Zx) | 17.93 cm³ | 1.094 in³ |
| Plastic section modulus (Zy) | 5.47 cm³ | 0.334 in³ |
| Radius of gyration (rx) | 5 cm | 1.970 in |
| Radius of gyration (ry) | 1.89 cm | 0.742 in |
15.0 kN·m
15.0 kN
88.35 mm
L/68