IMCA, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 932x225x12.7x15.9 IMCA in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 932x225x12.7x15.9 steel profile weighs 145.9 kg/m (98.06 lb/ft), has a depth of 932 mm (36.69 in), flange width 225 mm (8.86 in). Cross-sectional area: 18,587.54 mm². Moment of inertia Ix = 227,337.934 cm⁴, Iy = 3,033.882 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 932 mm | 36.69 in |
| Width (b) | 225 mm | 8.86 in |
| Web thickness (tw) | 12.7 mm | 0.50 in |
| Flange thickness (tf) | 15.9 mm | 0.63 in |
| Weight | 145.9 kg/m | 98.06 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 18,587.54 mm² | 28.811 in² |
| Moment of inertia (Ix) | 227,337.93 cm⁴ | 5461.79 in⁴ |
| Moment of inertia (Iy) | 3,033.88 cm⁴ | 72.89 in⁴ |
| Elastic section modulus (Sx) | 4,878.5 cm³ | 297.705 in³ |
| Elastic section modulus (Sy) | 269.68 cm³ | 16.457 in³ |
| Plastic section modulus (Zx) | 5,850.24 cm³ | 357.005 in³ |
| Plastic section modulus (Zy) | 438.77 cm³ | 26.775 in³ |
| Radius of gyration (rx) | 34.97 cm | 13.769 in |
| Radius of gyration (ry) | 4.04 cm | 1.591 in |
15.0 kN·m
15.0 kN
0.04 mm
L/161663