IMCA, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 788x180x9.5x19.1 IMCA in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 788x180x9.5x19.1 steel profile weighs 109.9 kg/m (73.85 lb/ft), has a depth of 788 mm (31.02 in), flange width 180 mm (7.09 in). Cross-sectional area: 13,999.1 mm². Moment of inertia Ix = 135,021.149 cm⁴, Iy = 1,861.877 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 788 mm | 31.02 in |
| Width (b) | 180 mm | 7.09 in |
| Web thickness (tw) | 9.5 mm | 0.37 in |
| Flange thickness (tf) | 19.1 mm | 0.75 in |
| Weight | 109.9 kg/m | 73.85 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 13,999.1 mm² | 21.699 in² |
| Moment of inertia (Ix) | 135,021.15 cm⁴ | 3243.88 in⁴ |
| Moment of inertia (Iy) | 1,861.88 cm⁴ | 44.73 in⁴ |
| Elastic section modulus (Sx) | 3,426.93 cm³ | 209.125 in³ |
| Elastic section modulus (Sy) | 206.88 cm³ | 12.624 in³ |
| Plastic section modulus (Zx) | 3,978.7 cm³ | 242.796 in³ |
| Plastic section modulus (Zy) | 326.34 cm³ | 19.914 in³ |
| Radius of gyration (rx) | 31.06 cm | 12.227 in |
| Radius of gyration (ry) | 3.65 cm | 1.436 in |
15.0 kN·m
15.0 kN
0.06 mm
L/96015