IMCA, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 632x225x7.9x15.9 IMCA in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 632x225x7.9x15.9 steel profile weighs 93.4 kg/m (62.78 lb/ft), has a depth of 632 mm (24.88 in), flange width 225 mm (8.86 in). Cross-sectional area: 11,896.58 mm². Moment of inertia Ix = 82,146.53 cm⁴, Iy = 3,020.982 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 632 mm | 24.88 in |
| Width (b) | 225 mm | 8.86 in |
| Web thickness (tw) | 7.9 mm | 0.31 in |
| Flange thickness (tf) | 15.9 mm | 0.63 in |
| Weight | 93.4 kg/m | 62.78 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 11,896.58 mm² | 18.440 in² |
| Moment of inertia (Ix) | 82,146.53 cm⁴ | 1973.57 in⁴ |
| Moment of inertia (Iy) | 3,020.98 cm⁴ | 72.58 in⁴ |
| Elastic section modulus (Sx) | 2,599.57 cm³ | 158.636 in³ |
| Elastic section modulus (Sy) | 268.53 cm³ | 16.387 in³ |
| Plastic section modulus (Zx) | 2,915.57 cm³ | 177.920 in³ |
| Plastic section modulus (Zy) | 411.83 cm³ | 25.132 in³ |
| Radius of gyration (rx) | 26.28 cm | 10.345 in |
| Radius of gyration (ry) | 5.04 cm | 1.984 in |
15.0 kN·m
15.0 kN
0.10 mm
L/58415