I 1864x360x12.7x31.8 IMCA · Weight & Dimensions
IMCA, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 1864x360x12.7x31.8 IMCA in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 1864x360x12.7x31.8 steel profile weighs 359.2 kg/m (241.40 lb/ft), has a depth of 1864 mm (73.39 in), flange width 360 mm (14.17 in). Cross-sectional area: 45,761.08 mm². Moment of inertia Ix = 2,539,346.611 cm⁴, Iy = 24,758.413 cm⁴.
Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 1864 mm | 73.39 in |
| Width (b) | 360 mm | 14.17 in |
| Web thickness (tw) | 12.7 mm | 0.50 in |
| Flange thickness (tf) | 31.8 mm | 1.25 in |
| Weight | 359.2 kg/m | 241.40 lb/ft |
Section Properties
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 45,761.08 mm² | 70.930 in² |
| Moment of inertia (Ix) | 2,539,346.61 cm⁴ | 61007.80 in⁴ |
| Moment of inertia (Iy) | 24,758.41 cm⁴ | 594.82 in⁴ |
| Elastic section modulus (Sx) | 27,246.21 cm³ | 1662.673 in³ |
| Elastic section modulus (Sy) | 1,375.47 cm³ | 83.937 in³ |
| Plastic section modulus (Zx) | 31,266.6 cm³ | 1908.013 in³ |
| Plastic section modulus (Zy) | 2,133.24 cm³ | 130.179 in³ |
| Radius of gyration (rx) | 74.49 cm | 29.328 in |
| Radius of gyration (ry) | 7.36 cm | 2.896 in |
Beam Calculator— I 1864x360x12.7x31.8
Results — I 1864x360x12.7x31.8
15.0 kN·m
15.0 kN
0.00 mm
L/1805758
