IMCA, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 1232x260x9.5x15.9 IMCA in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 1232x260x9.5x15.9 steel profile weighs 154.4 kg/m (103.76 lb/ft), has a depth of 1232 mm (48.50 in), flange width 260 mm (10.24 in). Cross-sectional area: 19,669.9 mm². Moment of inertia Ix = 442,574.297 cm⁴, Iy = 4,666.215 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 1232 mm | 48.50 in |
| Width (b) | 260 mm | 10.24 in |
| Web thickness (tw) | 9.5 mm | 0.37 in |
| Flange thickness (tf) | 15.9 mm | 0.63 in |
| Weight | 154.4 kg/m | 103.76 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 19,669.9 mm² | 30.488 in² |
| Moment of inertia (Ix) | 442,574.3 cm⁴ | 10632.85 in⁴ |
| Moment of inertia (Iy) | 4,666.22 cm⁴ | 112.11 in⁴ |
| Elastic section modulus (Sx) | 7,184.65 cm³ | 438.436 in³ |
| Elastic section modulus (Sy) | 358.94 cm³ | 21.904 in³ |
| Plastic section modulus (Zx) | 8,448.5 cm³ | 515.561 in³ |
| Plastic section modulus (Zy) | 564.5 cm³ | 34.448 in³ |
| Radius of gyration (rx) | 47.43 cm | 18.675 in |
| Radius of gyration (ry) | 4.87 cm | 1.918 in |
15.0 kN·m
15.0 kN
0.02 mm
L/314719