IAS, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 950x290x15.5x25 IAS in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 950x290x15.5x25 steel profile weighs 223.3 kg/m (150.08 lb/ft), has a depth of 950 mm (37.40 in), flange width 290 mm (11.42 in). Cross-sectional area: 28,450 mm². Moment of inertia Ix = 404,402.083 cm⁴, Iy = 10,190.012 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 950 mm | 37.40 in |
| Width (b) | 290 mm | 11.42 in |
| Web thickness (tw) | 15.5 mm | 0.61 in |
| Flange thickness (tf) | 25 mm | 0.98 in |
| Weight | 223.3 kg/m | 150.08 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 28,450 mm² | 44.097 in² |
| Moment of inertia (Ix) | 404,402.08 cm⁴ | 9715.76 in⁴ |
| Moment of inertia (Iy) | 10,190.01 cm⁴ | 244.82 in⁴ |
| Elastic section modulus (Sx) | 8,513.73 cm³ | 519.542 in³ |
| Elastic section modulus (Sy) | 702.76 cm³ | 42.885 in³ |
| Plastic section modulus (Zx) | 9,845 cm³ | 600.781 in³ |
| Plastic section modulus (Zy) | 1,105.31 cm³ | 67.450 in³ |
| Radius of gyration (rx) | 37.7 cm | 14.843 in |
| Radius of gyration (ry) | 5.98 cm | 2.356 in |
15.0 kN·m
15.0 kN
0.02 mm
L/287575