IAS, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 856x400x25x25 IAS in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 856x400x25x25 steel profile weighs 315.2 kg/m (211.80 lb/ft), has a depth of 856 mm (33.70 in), flange width 400 mm (15.75 in). Cross-sectional area: 40,150 mm². Moment of inertia Ix = 454,469.378 cm⁴, Iy = 26,771.615 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 856 mm | 33.70 in |
| Width (b) | 400 mm | 15.75 in |
| Web thickness (tw) | 25 mm | 0.98 in |
| Flange thickness (tf) | 25 mm | 0.98 in |
| Weight | 315.2 kg/m | 211.80 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 40,150 mm² | 62.232 in² |
| Moment of inertia (Ix) | 454,469.38 cm⁴ | 10918.63 in⁴ |
| Moment of inertia (Iy) | 26,771.61 cm⁴ | 643.19 in⁴ |
| Elastic section modulus (Sx) | 10,618.44 cm³ | 647.980 in³ |
| Elastic section modulus (Sy) | 1,338.58 cm³ | 81.686 in³ |
| Plastic section modulus (Zx) | 12,370.23 cm³ | 754.881 in³ |
| Plastic section modulus (Zy) | 2,125.94 cm³ | 129.733 in³ |
| Radius of gyration (rx) | 33.64 cm | 13.246 in |
| Radius of gyration (ry) | 8.17 cm | 3.215 in |
15.0 kN·m
15.0 kN
0.02 mm
L/323178