IAS, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 608x229x12.5x20 IAS in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 608x229x12.5x20 steel profile weighs 127.6 kg/m (85.77 lb/ft), has a depth of 608 mm (23.94 in), flange width 229 mm (9.02 in). Cross-sectional area: 16,260 mm². Moment of inertia Ix = 98,294.496 cm⁴, Iy = 4,012.241 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 608 mm | 23.94 in |
| Width (b) | 229 mm | 9.02 in |
| Web thickness (tw) | 12.5 mm | 0.49 in |
| Flange thickness (tf) | 20 mm | 0.79 in |
| Weight | 127.6 kg/m | 85.77 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 16,260 mm² | 25.203 in² |
| Moment of inertia (Ix) | 98,294.5 cm⁴ | 2361.53 in⁴ |
| Moment of inertia (Iy) | 4,012.24 cm⁴ | 96.39 in⁴ |
| Elastic section modulus (Sx) | 3,233.37 cm³ | 197.313 in³ |
| Elastic section modulus (Sy) | 350.41 cm³ | 21.384 in³ |
| Plastic section modulus (Zx) | 3,701.24 cm³ | 225.864 in³ |
| Plastic section modulus (Zy) | 546.6 cm³ | 33.356 in³ |
| Radius of gyration (rx) | 24.59 cm | 9.680 in |
| Radius of gyration (ry) | 4.97 cm | 1.956 in |
15.0 kN·m
15.0 kN
0.09 mm
L/69898