IAS, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 530x210x9.5x15.5 IAS in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 530x210x9.5x15.5 steel profile weighs 88.3 kg/m (59.35 lb/ft), has a depth of 530 mm (20.87 in), flange width 210 mm (8.27 in). Cross-sectional area: 11,250.5 mm². Moment of inertia Ix = 52,931.204 cm⁴, Iy = 2,395.99 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 530 mm | 20.87 in |
| Width (b) | 210 mm | 8.27 in |
| Web thickness (tw) | 9.5 mm | 0.37 in |
| Flange thickness (tf) | 15.5 mm | 0.61 in |
| Weight | 88.3 kg/m | 59.35 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 11,250.5 mm² | 17.438 in² |
| Moment of inertia (Ix) | 52,931.2 cm⁴ | 1271.67 in⁴ |
| Moment of inertia (Iy) | 2,395.99 cm⁴ | 57.56 in⁴ |
| Elastic section modulus (Sx) | 1,997.4 cm³ | 121.890 in³ |
| Elastic section modulus (Sy) | 228.19 cm³ | 13.925 in³ |
| Plastic section modulus (Zx) | 2,266.07 cm³ | 138.285 in³ |
| Plastic section modulus (Zy) | 353.03 cm³ | 21.544 in³ |
| Radius of gyration (rx) | 21.69 cm | 8.540 in |
| Radius of gyration (ry) | 4.61 cm | 1.817 in |
15.0 kN·m
15.0 kN
0.16 mm
L/37640