IAS, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 460x190x9.5x12.5 IAS in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 460x190x9.5x12.5 steel profile weighs 69.7 kg/m (46.86 lb/ft), has a depth of 460 mm (18.11 in), flange width 190 mm (7.48 in). Cross-sectional area: 8,882.5 mm². Moment of inertia Ix = 30,303.051 cm⁴, Iy = 1,432.066 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 460 mm | 18.11 in |
| Width (b) | 190 mm | 7.48 in |
| Web thickness (tw) | 9.5 mm | 0.37 in |
| Flange thickness (tf) | 12.5 mm | 0.49 in |
| Weight | 69.7 kg/m | 46.86 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 8,882.5 mm² | 13.768 in² |
| Moment of inertia (Ix) | 30,303.05 cm⁴ | 728.03 in⁴ |
| Moment of inertia (Iy) | 1,432.07 cm⁴ | 34.41 in⁴ |
| Elastic section modulus (Sx) | 1,317.52 cm³ | 80.401 in³ |
| Elastic section modulus (Sy) | 150.74 cm³ | 9.199 in³ |
| Plastic section modulus (Zx) | 1,512.22 cm³ | 92.282 in³ |
| Plastic section modulus (Zy) | 235.44 cm³ | 14.367 in³ |
| Radius of gyration (rx) | 18.47 cm | 7.272 in |
| Radius of gyration (ry) | 4.02 cm | 1.581 in |
15.0 kN·m
15.0 kN
0.28 mm
L/21549