IAS, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 405x180x8x20 IAS in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 405x180x8x20 steel profile weighs 79.4 kg/m (53.38 lb/ft), has a depth of 405 mm (15.94 in), flange width 180 mm (7.09 in). Cross-sectional area: 10,120 mm². Moment of inertia Ix = 29,946.308 cm⁴, Iy = 1,945.557 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 405 mm | 15.94 in |
| Width (b) | 180 mm | 7.09 in |
| Web thickness (tw) | 8 mm | 0.31 in |
| Flange thickness (tf) | 20 mm | 0.79 in |
| Weight | 79.4 kg/m | 53.38 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 10,120 mm² | 15.686 in² |
| Moment of inertia (Ix) | 29,946.31 cm⁴ | 719.46 in⁴ |
| Moment of inertia (Iy) | 1,945.56 cm⁴ | 46.74 in⁴ |
| Elastic section modulus (Sx) | 1,478.83 cm³ | 90.244 in³ |
| Elastic section modulus (Sy) | 216.17 cm³ | 13.192 in³ |
| Plastic section modulus (Zx) | 1,652.45 cm³ | 100.839 in³ |
| Plastic section modulus (Zy) | 329.84 cm³ | 20.128 in³ |
| Radius of gyration (rx) | 17.2 cm | 6.772 in |
| Radius of gyration (ry) | 4.38 cm | 1.726 in |
15.0 kN·m
15.0 kN
0.28 mm
L/21295