IAS, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 400x400x20x44.5 IAS in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 400x400x20x44.5 steel profile weighs 328.3 kg/m (220.61 lb/ft), has a depth of 400 mm (15.75 in), flange width 400 mm (15.75 in). Cross-sectional area: 41,820 mm². Moment of inertia Ix = 118,079.269 cm⁴, Iy = 47,487.4 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 400 mm | 15.75 in |
| Width (b) | 400 mm | 15.75 in |
| Web thickness (tw) | 20 mm | 0.79 in |
| Flange thickness (tf) | 44.5 mm | 1.75 in |
| Weight | 328.3 kg/m | 220.61 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 41,820 mm² | 64.821 in² |
| Moment of inertia (Ix) | 118,079.27 cm⁴ | 2836.85 in⁴ |
| Moment of inertia (Iy) | 47,487.4 cm⁴ | 1140.88 in⁴ |
| Elastic section modulus (Sx) | 5,903.96 cm³ | 360.283 in³ |
| Elastic section modulus (Sy) | 2,374.37 cm³ | 144.894 in³ |
| Plastic section modulus (Zx) | 6,811.51 cm³ | 415.665 in³ |
| Plastic section modulus (Zy) | 3,591.1 cm³ | 219.143 in³ |
| Radius of gyration (rx) | 16.8 cm | 6.615 in |
| Radius of gyration (ry) | 10.66 cm | 4.195 in |
15.0 kN·m
15.0 kN
0.07 mm
L/83967