IAS, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 400x400x20x25 IAS in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 400x400x20x25 steel profile weighs 211.9 kg/m (142.43 lb/ft), has a depth of 400 mm (15.75 in), flange width 400 mm (15.75 in). Cross-sectional area: 27,000 mm². Moment of inertia Ix = 77,562.5 cm⁴, Iy = 26,690 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 400 mm | 15.75 in |
| Width (b) | 400 mm | 15.75 in |
| Web thickness (tw) | 20 mm | 0.79 in |
| Flange thickness (tf) | 25 mm | 0.98 in |
| Weight | 211.9 kg/m | 142.43 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 27,000 mm² | 41.850 in² |
| Moment of inertia (Ix) | 77,562.5 cm⁴ | 1863.44 in⁴ |
| Moment of inertia (Iy) | 26,690 cm⁴ | 641.23 in⁴ |
| Elastic section modulus (Sx) | 3,878.13 cm³ | 236.659 in³ |
| Elastic section modulus (Sy) | 1,334.5 cm³ | 81.437 in³ |
| Plastic section modulus (Zx) | 4,362.5 cm³ | 266.217 in³ |
| Plastic section modulus (Zy) | 2,035 cm³ | 124.184 in³ |
| Radius of gyration (rx) | 16.95 cm | 6.673 in |
| Radius of gyration (ry) | 9.94 cm | 3.914 in |
15.0 kN·m
15.0 kN
0.11 mm
L/55156