IAS, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 400x400x15.5x40 IAS in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 400x400x15.5x40 steel profile weighs 290.1 kg/m (194.97 lb/ft), has a depth of 400 mm (15.75 in), flange width 400 mm (15.75 in). Cross-sectional area: 36,960 mm². Moment of inertia Ix = 108,339.2 cm⁴, Iy = 42,676.597 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 400 mm | 15.75 in |
| Width (b) | 400 mm | 15.75 in |
| Web thickness (tw) | 15.5 mm | 0.61 in |
| Flange thickness (tf) | 40 mm | 1.57 in |
| Weight | 290.1 kg/m | 194.97 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 36,960 mm² | 57.288 in² |
| Moment of inertia (Ix) | 108,339.2 cm⁴ | 2602.85 in⁴ |
| Moment of inertia (Iy) | 42,676.6 cm⁴ | 1025.31 in⁴ |
| Elastic section modulus (Sx) | 5,416.96 cm³ | 330.565 in³ |
| Elastic section modulus (Sy) | 2,133.83 cm³ | 130.215 in³ |
| Plastic section modulus (Zx) | 6,156.8 cm³ | 375.713 in³ |
| Plastic section modulus (Zy) | 3,219.22 cm³ | 196.450 in³ |
| Radius of gyration (rx) | 17.12 cm | 6.741 in |
| Radius of gyration (ry) | 10.75 cm | 4.231 in |
15.0 kN·m
15.0 kN
0.08 mm
L/77041