IAS, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 342x366x12.5x25 IAS in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 342x366x12.5x25 steel profile weighs 172.3 kg/m (115.79 lb/ft), has a depth of 342 mm (13.46 in), flange width 366 mm (14.41 in). Cross-sectional area: 21,950 mm². Moment of inertia Ix = 48,662.477 cm⁴, Iy = 20,433.043 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 342 mm | 13.46 in |
| Width (b) | 366 mm | 14.41 in |
| Web thickness (tw) | 12.5 mm | 0.49 in |
| Flange thickness (tf) | 25 mm | 0.98 in |
| Weight | 172.3 kg/m | 115.79 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 21,950 mm² | 34.023 in² |
| Moment of inertia (Ix) | 48,662.48 cm⁴ | 1169.12 in⁴ |
| Moment of inertia (Iy) | 20,433.04 cm⁴ | 490.90 in⁴ |
| Elastic section modulus (Sx) | 2,845.76 cm³ | 173.660 in³ |
| Elastic section modulus (Sy) | 1,116.56 cm³ | 68.137 in³ |
| Plastic section modulus (Zx) | 3,167 cm³ | 193.263 in³ |
| Plastic section modulus (Zy) | 1,685.86 cm³ | 102.878 in³ |
| Radius of gyration (rx) | 14.89 cm | 5.862 in |
| Radius of gyration (ry) | 9.65 cm | 3.799 in |
15.0 kN·m
15.0 kN
0.17 mm
L/34604