IAS, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 300x170x6.3x12.5 IAS in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 300x170x6.3x12.5 steel profile weighs 47.0 kg/m (31.56 lb/ft), has a depth of 300 mm (11.81 in), flange width 170 mm (6.69 in). Cross-sectional area: 5,982.5 mm². Moment of inertia Ix = 9,879.596 cm⁴, Iy = 1,024.115 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 300 mm | 11.81 in |
| Width (b) | 170 mm | 6.69 in |
| Web thickness (tw) | 6.3 mm | 0.25 in |
| Flange thickness (tf) | 12.5 mm | 0.49 in |
| Weight | 47.0 kg/m | 31.56 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 5,982.5 mm² | 9.273 in² |
| Moment of inertia (Ix) | 9,879.6 cm⁴ | 237.36 in⁴ |
| Moment of inertia (Iy) | 1,024.11 cm⁴ | 24.60 in⁴ |
| Elastic section modulus (Sx) | 658.64 cm³ | 40.193 in³ |
| Elastic section modulus (Sy) | 120.48 cm³ | 7.352 in³ |
| Plastic section modulus (Zx) | 730.05 cm³ | 44.550 in³ |
| Plastic section modulus (Zy) | 183.35 cm³ | 11.189 in³ |
| Radius of gyration (rx) | 12.85 cm | 5.059 in |
| Radius of gyration (ry) | 4.14 cm | 1.629 in |
15.0 kN·m
15.0 kN
0.85 mm
L/7025