IAS, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 210x207x9.5x15.5 IAS in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 210x207x9.5x15.5 steel profile weighs 63.7 kg/m (42.82 lb/ft), has a depth of 210 mm (8.27 in), flange width 207 mm (8.15 in). Cross-sectional area: 8,117.5 mm². Moment of inertia Ix = 6,535.813 cm⁴, Iy = 2,292.629 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 210 mm | 8.27 in |
| Width (b) | 207 mm | 8.15 in |
| Web thickness (tw) | 9.5 mm | 0.37 in |
| Flange thickness (tf) | 15.5 mm | 0.61 in |
| Weight | 63.7 kg/m | 42.82 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 8,117.5 mm² | 12.582 in² |
| Moment of inertia (Ix) | 6,535.81 cm⁴ | 157.02 in⁴ |
| Moment of inertia (Iy) | 2,292.63 cm⁴ | 55.08 in⁴ |
| Elastic section modulus (Sx) | 622.46 cm³ | 37.985 in³ |
| Elastic section modulus (Sy) | 221.51 cm³ | 13.517 in³ |
| Plastic section modulus (Zx) | 700.15 cm³ | 42.726 in³ |
| Plastic section modulus (Zy) | 336.12 cm³ | 20.511 in³ |
| Radius of gyration (rx) | 8.97 cm | 3.533 in |
| Radius of gyration (ry) | 5.31 cm | 2.092 in |
15.0 kN·m
15.0 kN
1.29 mm
L/4648