CHS 63.5x5 Gerdau Weight & Dimensions · 7.2 kg/m | Free Calculator

CHS 63.5x5 Gerdau · Weight & Dimensions

Gerdau, tubes · Circular Hollow Section

Circular Hollow Sections (CHS) are round tubular profiles with the most efficient cross-section for compression. Used for columns, trusses, and architectural structures.

Put the CHS 63.5x5 Gerdau in a real structure

Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.

Free, and it opens without signing up.
Also known as: Caño estructural redondo (Argentina)

The CHS 63.5x5 steel profile weighs 7.2 kg/m (4.85 lb/ft). Cross-sectional area: 918.916 mm². Moment of inertia Ix = 39.597 cm⁴, Iy = 39.597 cm⁴.

⌀63.5t=5
Cross-section (not to scale)
Gauge equivalent: 5 mm ≈ 6 gauge (Manufacturers Standard Gage)

Dimensions

PropertyMetricImperial
Thickness (t)5 mm0.20 in
Diameter (d)63.5 mm2.50 in
Weight7.2 kg/m4.85 lb/ft

Section Properties

PropertyMetricImperial
Area (A)918.92 mm²1.424 in²
Moment of inertia (Ix)39.6 cm⁴0.95 in⁴
Moment of inertia (Iy)39.6 cm⁴0.95 in⁴
Elastic section modulus (Sx)12.47 cm³0.761 in³
Elastic section modulus (Sy)12.47 cm³0.761 in³
Plastic section modulus (Zx)17.15 cm³1.047 in³
Plastic section modulus (Zy)17.15 cm³1.047 in³
Radius of gyration (rx)2.08 cm0.817 in
Radius of gyration (ry)2.08 cm0.817 in

Beam Calculator— CHS 63.5x5

drag to orbit
mfixed @ 0mfixed @ 6m→kN/m

Results — CHS 63.5x5

Mmax

15.0 kN·m

Vmax

15.0 kN

δmax

213.09 mm

L/28

R115.0 kN| 15.0 kN·mR215.0 kN| -15.0 kN·m
Standard:

Lose the fear of working in 3D

No installation, right in the browser — start now

Try the 3D Editor