Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 900x400x12x35 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 900x400x12x35 steel profile weighs 298.0 kg/m (200.25 lb/ft), has a depth of 900 mm (35.43 in), flange width 400 mm (15.75 in). Cross-sectional area: 37,960 mm². Moment of inertia Ix = 581,222.033 cm⁴, Iy = 37,345.285 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 900 mm | 35.43 in |
| Width (b) | 400 mm | 15.75 in |
| Web thickness (tw) | 12 mm | 0.47 in |
| Flange thickness (tf) | 35 mm | 1.38 in |
| Weight | 298.0 kg/m | 200.25 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 37,960 mm² | 58.838 in² |
| Moment of inertia (Ix) | 581,222.03 cm⁴ | 13963.86 in⁴ |
| Moment of inertia (Iy) | 37,345.29 cm⁴ | 897.22 in⁴ |
| Elastic section modulus (Sx) | 12,916.05 cm³ | 788.189 in³ |
| Elastic section modulus (Sy) | 1,867.26 cm³ | 113.948 in³ |
| Plastic section modulus (Zx) | 14,176.7 cm³ | 865.119 in³ |
| Plastic section modulus (Zy) | 2,829.88 cm³ | 172.691 in³ |
| Radius of gyration (rx) | 39.13 cm | 15.405 in |
| Radius of gyration (ry) | 9.92 cm | 3.905 in |
15.0 kN·m
15.0 kN
0.01 mm
L/413313