Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 800x350x10x32 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 800x350x10x32 steel profile weighs 233.6 kg/m (156.99 lb/ft), has a depth of 800 mm (31.50 in), flange width 350 mm (13.78 in). Cross-sectional area: 29,760 mm². Moment of inertia Ix = 363,716.608 cm⁴, Iy = 22,872.8 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 800 mm | 31.50 in |
| Width (b) | 350 mm | 13.78 in |
| Web thickness (tw) | 10 mm | 0.39 in |
| Flange thickness (tf) | 32 mm | 1.26 in |
| Weight | 233.6 kg/m | 156.99 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 29,760 mm² | 46.128 in² |
| Moment of inertia (Ix) | 363,716.61 cm⁴ | 8738.29 in⁴ |
| Moment of inertia (Iy) | 22,872.8 cm⁴ | 549.52 in⁴ |
| Elastic section modulus (Sx) | 9,092.92 cm³ | 554.886 in³ |
| Elastic section modulus (Sy) | 1,307.02 cm³ | 79.759 in³ |
| Plastic section modulus (Zx) | 9,955.84 cm³ | 607.545 in³ |
| Plastic section modulus (Zy) | 1,978.4 cm³ | 120.730 in³ |
| Radius of gyration (rx) | 34.96 cm | 13.764 in |
| Radius of gyration (ry) | 8.77 cm | 3.452 in |
15.0 kN·m
15.0 kN
0.02 mm
L/258643