Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 800x350x10x25 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 800x350x10x25 steel profile weighs 196.3 kg/m (131.88 lb/ft), has a depth of 800 mm (31.50 in), flange width 350 mm (13.78 in). Cross-sectional area: 25,000 mm². Moment of inertia Ix = 298,020.833 cm⁴, Iy = 17,870.833 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 800 mm | 31.50 in |
| Width (b) | 350 mm | 13.78 in |
| Web thickness (tw) | 10 mm | 0.39 in |
| Flange thickness (tf) | 25 mm | 0.98 in |
| Weight | 196.3 kg/m | 131.88 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 25,000 mm² | 38.750 in² |
| Moment of inertia (Ix) | 298,020.83 cm⁴ | 7159.95 in⁴ |
| Moment of inertia (Iy) | 17,870.83 cm⁴ | 429.35 in⁴ |
| Elastic section modulus (Sx) | 7,450.52 cm³ | 454.661 in³ |
| Elastic section modulus (Sy) | 1,021.19 cm³ | 62.317 in³ |
| Plastic section modulus (Zx) | 8,187.5 cm³ | 499.634 in³ |
| Plastic section modulus (Zy) | 1,550 cm³ | 94.587 in³ |
| Radius of gyration (rx) | 34.53 cm | 13.593 in |
| Radius of gyration (ry) | 8.45 cm | 3.329 in |
15.0 kN·m
15.0 kN
0.03 mm
L/211926