Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 800x300x10x25 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 800x300x10x25 steel profile weighs 176.6 kg/m (118.69 lb/ft), has a depth of 800 mm (31.50 in), flange width 300 mm (11.81 in). Cross-sectional area: 22,500 mm². Moment of inertia Ix = 260,468.75 cm⁴, Iy = 11,256.25 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 800 mm | 31.50 in |
| Width (b) | 300 mm | 11.81 in |
| Web thickness (tw) | 10 mm | 0.39 in |
| Flange thickness (tf) | 25 mm | 0.98 in |
| Weight | 176.6 kg/m | 118.69 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 22,500 mm² | 34.875 in² |
| Moment of inertia (Ix) | 260,468.75 cm⁴ | 6257.76 in⁴ |
| Moment of inertia (Iy) | 11,256.25 cm⁴ | 270.43 in⁴ |
| Elastic section modulus (Sx) | 6,511.72 cm³ | 397.371 in³ |
| Elastic section modulus (Sy) | 750.42 cm³ | 45.793 in³ |
| Plastic section modulus (Zx) | 7,218.75 cm³ | 440.517 in³ |
| Plastic section modulus (Zy) | 1,143.75 cm³ | 69.796 in³ |
| Radius of gyration (rx) | 34.02 cm | 13.395 in |
| Radius of gyration (ry) | 7.07 cm | 2.785 in |
15.0 kN·m
15.0 kN
0.03 mm
L/185222