Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 800x300x10x20 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 800x300x10x20 steel profile weighs 153.9 kg/m (103.39 lb/ft), has a depth of 800 mm (31.50 in), flange width 300 mm (11.81 in). Cross-sectional area: 19,600 mm². Moment of inertia Ix = 219,141.333 cm⁴, Iy = 9,006.333 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 800 mm | 31.50 in |
| Width (b) | 300 mm | 11.81 in |
| Web thickness (tw) | 10 mm | 0.39 in |
| Flange thickness (tf) | 20 mm | 0.79 in |
| Weight | 153.9 kg/m | 103.39 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 19,600 mm² | 30.380 in² |
| Moment of inertia (Ix) | 219,141.33 cm⁴ | 5264.87 in⁴ |
| Moment of inertia (Iy) | 9,006.33 cm⁴ | 216.38 in⁴ |
| Elastic section modulus (Sx) | 5,478.53 cm³ | 334.322 in³ |
| Elastic section modulus (Sy) | 600.42 cm³ | 36.640 in³ |
| Plastic section modulus (Zx) | 6,124 cm³ | 373.711 in³ |
| Plastic section modulus (Zy) | 919 cm³ | 56.081 in³ |
| Radius of gyration (rx) | 33.44 cm | 13.164 in |
| Radius of gyration (ry) | 6.78 cm | 2.669 in |
15.0 kN·m
15.0 kN
0.04 mm
L/155834