Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 700x350x8x28 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 700x350x8x28 steel profile weighs 194.3 kg/m (130.56 lb/ft), has a depth of 700 mm (27.56 in), flange width 350 mm (13.78 in). Cross-sectional area: 24,752 mm². Moment of inertia Ix = 239,210.212 cm⁴, Iy = 20,011.081 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 700 mm | 27.56 in |
| Width (b) | 350 mm | 13.78 in |
| Web thickness (tw) | 8 mm | 0.31 in |
| Flange thickness (tf) | 28 mm | 1.10 in |
| Weight | 194.3 kg/m | 130.56 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 24,752 mm² | 38.366 in² |
| Moment of inertia (Ix) | 239,210.21 cm⁴ | 5747.03 in⁴ |
| Moment of inertia (Iy) | 20,011.08 cm⁴ | 480.77 in⁴ |
| Elastic section modulus (Sx) | 6,834.58 cm³ | 417.073 in³ |
| Elastic section modulus (Sy) | 1,143.49 cm³ | 69.780 in³ |
| Plastic section modulus (Zx) | 7,415.07 cm³ | 452.497 in³ |
| Plastic section modulus (Zy) | 1,725.3 cm³ | 105.285 in³ |
| Radius of gyration (rx) | 31.09 cm | 12.239 in |
| Radius of gyration (ry) | 8.99 cm | 3.540 in |
15.0 kN·m
15.0 kN
0.04 mm
L/170105