Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 700x300x8x14 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 700x300x8x14 steel profile weighs 108.2 kg/m (72.69 lb/ft), has a depth of 700 mm (27.56 in), flange width 300 mm (11.81 in). Cross-sectional area: 13,776 mm². Moment of inertia Ix = 119,069.843 cm⁴, Iy = 6,302.867 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 700 mm | 27.56 in |
| Width (b) | 300 mm | 11.81 in |
| Web thickness (tw) | 8 mm | 0.31 in |
| Flange thickness (tf) | 14 mm | 0.55 in |
| Weight | 108.2 kg/m | 72.69 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 13,776 mm² | 21.353 in² |
| Moment of inertia (Ix) | 119,069.84 cm⁴ | 2860.65 in⁴ |
| Moment of inertia (Iy) | 6,302.87 cm⁴ | 151.43 in⁴ |
| Elastic section modulus (Sx) | 3,402 cm³ | 207.603 in³ |
| Elastic section modulus (Sy) | 420.19 cm³ | 25.642 in³ |
| Plastic section modulus (Zx) | 3,784.37 cm³ | 230.937 in³ |
| Plastic section modulus (Zy) | 640.75 cm³ | 39.101 in³ |
| Radius of gyration (rx) | 29.4 cm | 11.575 in |
| Radius of gyration (ry) | 6.76 cm | 2.663 in |
15.0 kN·m
15.0 kN
0.07 mm
L/84672