Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 500x300x8x20 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 500x300x8x20 steel profile weighs 123.1 kg/m (82.72 lb/ft), has a depth of 500 mm (19.69 in), flange width 300 mm (11.81 in). Cross-sectional area: 15,680 mm². Moment of inertia Ix = 75,649.067 cm⁴, Iy = 9,001.963 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 500 mm | 19.69 in |
| Width (b) | 300 mm | 11.81 in |
| Web thickness (tw) | 8 mm | 0.31 in |
| Flange thickness (tf) | 20 mm | 0.79 in |
| Weight | 123.1 kg/m | 82.72 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 15,680 mm² | 24.304 in² |
| Moment of inertia (Ix) | 75,649.07 cm⁴ | 1817.47 in⁴ |
| Moment of inertia (Iy) | 9,001.96 cm⁴ | 216.27 in⁴ |
| Elastic section modulus (Sx) | 3,025.96 cm³ | 184.656 in³ |
| Elastic section modulus (Sy) | 600.13 cm³ | 36.622 in³ |
| Plastic section modulus (Zx) | 3,303.2 cm³ | 201.574 in³ |
| Plastic section modulus (Zy) | 907.36 cm³ | 55.371 in³ |
| Radius of gyration (rx) | 21.96 cm | 8.648 in |
| Radius of gyration (ry) | 7.58 cm | 2.983 in |
15.0 kN·m
15.0 kN
0.11 mm
L/53795