Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 500x150x5x10 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 500x150x5x10 steel profile weighs 42.4 kg/m (28.49 lb/ft), has a depth of 500 mm (19.69 in), flange width 150 mm (5.91 in). Cross-sectional area: 5,400 mm². Moment of inertia Ix = 22,618 cm⁴, Iy = 563 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 500 mm | 19.69 in |
| Width (b) | 150 mm | 5.91 in |
| Web thickness (tw) | 5 mm | 0.20 in |
| Flange thickness (tf) | 10 mm | 0.39 in |
| Weight | 42.4 kg/m | 28.49 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 5,400 mm² | 8.370 in² |
| Moment of inertia (Ix) | 22,618 cm⁴ | 543.40 in⁴ |
| Moment of inertia (Iy) | 563 cm⁴ | 13.53 in⁴ |
| Elastic section modulus (Sx) | 904.72 cm³ | 55.210 in³ |
| Elastic section modulus (Sy) | 75.07 cm³ | 4.581 in³ |
| Plastic section modulus (Zx) | 1,023 cm³ | 62.428 in³ |
| Plastic section modulus (Zy) | 115.5 cm³ | 7.048 in³ |
| Radius of gyration (rx) | 20.47 cm | 8.057 in |
| Radius of gyration (ry) | 3.23 cm | 1.271 in |
15.0 kN·m
15.0 kN
0.37 mm
L/16084