Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 450x200x8x16 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 450x200x8x16 steel profile weighs 76.5 kg/m (51.38 lb/ft), has a depth of 450 mm (17.72 in), flange width 200 mm (7.87 in). Cross-sectional area: 9,744 mm². Moment of inertia Ix = 35,019.589 cm⁴, Iy = 2,135.117 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 450 mm | 17.72 in |
| Width (b) | 200 mm | 7.87 in |
| Web thickness (tw) | 8 mm | 0.31 in |
| Flange thickness (tf) | 16 mm | 0.63 in |
| Weight | 76.5 kg/m | 51.38 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 9,744 mm² | 15.103 in² |
| Moment of inertia (Ix) | 35,019.59 cm⁴ | 841.35 in⁴ |
| Moment of inertia (Iy) | 2,135.12 cm⁴ | 51.30 in⁴ |
| Elastic section modulus (Sx) | 1,556.43 cm³ | 94.979 in³ |
| Elastic section modulus (Sy) | 213.51 cm³ | 13.029 in³ |
| Plastic section modulus (Zx) | 1,738.25 cm³ | 106.075 in³ |
| Plastic section modulus (Zy) | 326.69 cm³ | 19.936 in³ |
| Radius of gyration (rx) | 18.96 cm | 7.464 in |
| Radius of gyration (ry) | 4.68 cm | 1.843 in |
15.0 kN·m
15.0 kN
0.24 mm
L/24903