Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 400x250x6x14 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 400x250x6x14 steel profile weighs 72.5 kg/m (48.69 lb/ft), has a depth of 400 mm (15.75 in), flange width 250 mm (9.84 in). Cross-sectional area: 9,232 mm². Moment of inertia Ix = 28,659.676 cm⁴, Iy = 3,646.503 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 400 mm | 15.75 in |
| Width (b) | 250 mm | 9.84 in |
| Web thickness (tw) | 6 mm | 0.24 in |
| Flange thickness (tf) | 14 mm | 0.55 in |
| Weight | 72.5 kg/m | 48.69 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 9,232 mm² | 14.310 in² |
| Moment of inertia (Ix) | 28,659.68 cm⁴ | 688.55 in⁴ |
| Moment of inertia (Iy) | 3,646.5 cm⁴ | 87.61 in⁴ |
| Elastic section modulus (Sx) | 1,432.98 cm³ | 87.446 in³ |
| Elastic section modulus (Sy) | 291.72 cm³ | 17.802 in³ |
| Plastic section modulus (Zx) | 1,558.58 cm³ | 95.111 in³ |
| Plastic section modulus (Zy) | 440.85 cm³ | 26.902 in³ |
| Radius of gyration (rx) | 17.62 cm | 6.937 in |
| Radius of gyration (ry) | 6.28 cm | 2.474 in |
15.0 kN·m
15.0 kN
0.29 mm
L/20380