Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 400x150x6x10 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 400x150x6x10 steel profile weighs 41.5 kg/m (27.85 lb/ft), has a depth of 400 mm (15.75 in), flange width 150 mm (5.91 in). Cross-sectional area: 5,280 mm². Moment of inertia Ix = 14,153.6 cm⁴, Iy = 563.184 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 400 mm | 15.75 in |
| Width (b) | 150 mm | 5.91 in |
| Web thickness (tw) | 6 mm | 0.24 in |
| Flange thickness (tf) | 10 mm | 0.39 in |
| Weight | 41.5 kg/m | 27.85 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 5,280 mm² | 8.184 in² |
| Moment of inertia (Ix) | 14,153.6 cm⁴ | 340.04 in⁴ |
| Moment of inertia (Iy) | 563.18 cm⁴ | 13.53 in⁴ |
| Elastic section modulus (Sx) | 707.68 cm³ | 43.185 in³ |
| Elastic section modulus (Sy) | 75.09 cm³ | 4.582 in³ |
| Plastic section modulus (Zx) | 801.6 cm³ | 48.917 in³ |
| Plastic section modulus (Zy) | 115.92 cm³ | 7.074 in³ |
| Radius of gyration (rx) | 16.37 cm | 6.446 in |
| Radius of gyration (ry) | 3.27 cm | 1.286 in |
15.0 kN·m
15.0 kN
0.60 mm
L/10065