Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 400x150x5x6 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 400x150x5x6 steel profile weighs 29.4 kg/m (19.73 lb/ft), has a depth of 400 mm (15.75 in), flange width 150 mm (5.91 in). Cross-sectional area: 3,740 mm². Moment of inertia Ix = 9,419.955 cm⁴, Iy = 337.904 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 400 mm | 15.75 in |
| Width (b) | 150 mm | 5.91 in |
| Web thickness (tw) | 5 mm | 0.20 in |
| Flange thickness (tf) | 6 mm | 0.24 in |
| Weight | 29.4 kg/m | 19.73 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 3,740 mm² | 5.797 in² |
| Moment of inertia (Ix) | 9,419.95 cm⁴ | 226.31 in⁴ |
| Moment of inertia (Iy) | 337.9 cm⁴ | 8.12 in⁴ |
| Elastic section modulus (Sx) | 471 cm³ | 28.742 in³ |
| Elastic section modulus (Sy) | 45.05 cm³ | 2.749 in³ |
| Plastic section modulus (Zx) | 542.78 cm³ | 33.123 in³ |
| Plastic section modulus (Zy) | 69.93 cm³ | 4.267 in³ |
| Radius of gyration (rx) | 15.87 cm | 6.248 in |
| Radius of gyration (ry) | 3.01 cm | 1.183 in |
15.0 kN·m
15.0 kN
0.90 mm
L/6699