Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 350x350x10x18 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 350x350x10x18 steel profile weighs 123.6 kg/m (83.03 lb/ft), has a depth of 350 mm (13.78 in), flange width 350 mm (13.78 in). Cross-sectional area: 15,740 mm². Moment of inertia Ix = 37,334.509 cm⁴, Iy = 12,865.117 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 350 mm | 13.78 in |
| Width (b) | 350 mm | 13.78 in |
| Web thickness (tw) | 10 mm | 0.39 in |
| Flange thickness (tf) | 18 mm | 0.71 in |
| Weight | 123.6 kg/m | 83.03 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 15,740 mm² | 24.397 in² |
| Moment of inertia (Ix) | 37,334.51 cm⁴ | 896.96 in⁴ |
| Moment of inertia (Iy) | 12,865.12 cm⁴ | 309.08 in⁴ |
| Elastic section modulus (Sx) | 2,133.4 cm³ | 130.189 in³ |
| Elastic section modulus (Sy) | 735.15 cm³ | 44.862 in³ |
| Plastic section modulus (Zx) | 2,338.09 cm³ | 142.680 in³ |
| Plastic section modulus (Zy) | 1,110.35 cm³ | 67.758 in³ |
| Radius of gyration (rx) | 15.4 cm | 6.063 in |
| Radius of gyration (ry) | 9.04 cm | 3.559 in |
15.0 kN·m
15.0 kN
0.23 mm
L/26549