Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 350x300x8x22 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 350x300x8x22 steel profile weighs 122.8 kg/m (82.56 lb/ft), has a depth of 350 mm (13.78 in), flange width 300 mm (11.81 in). Cross-sectional area: 15,648 mm². Moment of inertia Ix = 37,466.134 cm⁴, Iy = 9,901.306 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 350 mm | 13.78 in |
| Width (b) | 300 mm | 11.81 in |
| Web thickness (tw) | 8 mm | 0.31 in |
| Flange thickness (tf) | 22 mm | 0.87 in |
| Weight | 122.8 kg/m | 82.56 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 15,648 mm² | 24.254 in² |
| Moment of inertia (Ix) | 37,466.13 cm⁴ | 900.12 in⁴ |
| Moment of inertia (Iy) | 9,901.31 cm⁴ | 237.88 in⁴ |
| Elastic section modulus (Sx) | 2,140.92 cm³ | 130.648 in³ |
| Elastic section modulus (Sy) | 660.09 cm³ | 40.281 in³ |
| Plastic section modulus (Zx) | 2,352.07 cm³ | 143.533 in³ |
| Plastic section modulus (Zy) | 994.9 cm³ | 60.713 in³ |
| Radius of gyration (rx) | 15.47 cm | 6.092 in |
| Radius of gyration (ry) | 7.95 cm | 3.132 in |
15.0 kN·m
15.0 kN
0.23 mm
L/26643