Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 350x250x6x12 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 350x250x6x12 steel profile weighs 62.5 kg/m (41.99 lb/ft), has a depth of 350 mm (13.78 in), flange width 250 mm (9.84 in). Cross-sectional area: 7,956 mm². Moment of inertia Ix = 18,876.099 cm⁴, Iy = 3,125.587 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 350 mm | 13.78 in |
| Width (b) | 250 mm | 9.84 in |
| Web thickness (tw) | 6 mm | 0.24 in |
| Flange thickness (tf) | 12 mm | 0.47 in |
| Weight | 62.5 kg/m | 41.99 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 7,956 mm² | 12.332 in² |
| Moment of inertia (Ix) | 18,876.1 cm⁴ | 453.50 in⁴ |
| Moment of inertia (Iy) | 3,125.59 cm⁴ | 75.09 in⁴ |
| Elastic section modulus (Sx) | 1,078.63 cm³ | 65.823 in³ |
| Elastic section modulus (Sy) | 250.05 cm³ | 15.259 in³ |
| Plastic section modulus (Zx) | 1,173.41 cm³ | 71.606 in³ |
| Plastic section modulus (Zy) | 377.93 cm³ | 23.063 in³ |
| Radius of gyration (rx) | 15.4 cm | 6.064 in |
| Radius of gyration (ry) | 6.27 cm | 2.468 in |
15.0 kN·m
15.0 kN
0.45 mm
L/13423