Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 350x150x4x8 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 350x150x4x8 steel profile weighs 29.4 kg/m (19.73 lb/ft), has a depth of 350 mm (13.78 in), flange width 150 mm (5.91 in). Cross-sectional area: 3,736 mm². Moment of inertia Ix = 8,261.11 cm⁴, Iy = 450.178 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 350 mm | 13.78 in |
| Width (b) | 150 mm | 5.91 in |
| Web thickness (tw) | 4 mm | 0.16 in |
| Flange thickness (tf) | 8 mm | 0.31 in |
| Weight | 29.4 kg/m | 19.73 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 3,736 mm² | 5.791 in² |
| Moment of inertia (Ix) | 8,261.11 cm⁴ | 198.47 in⁴ |
| Moment of inertia (Iy) | 450.18 cm⁴ | 10.82 in⁴ |
| Elastic section modulus (Sx) | 472.06 cm³ | 28.807 in³ |
| Elastic section modulus (Sy) | 60.02 cm³ | 3.663 in³ |
| Plastic section modulus (Zx) | 521.96 cm³ | 31.852 in³ |
| Plastic section modulus (Zy) | 91.34 cm³ | 5.574 in³ |
| Radius of gyration (rx) | 14.87 cm | 5.854 in |
| Radius of gyration (ry) | 3.47 cm | 1.367 in |
15.0 kN·m
15.0 kN
1.02 mm
L/5875