Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 350x100x4x6 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 350x100x4x6 steel profile weighs 20.0 kg/m (13.45 lb/ft), has a depth of 350 mm (13.78 in), flange width 100 mm (3.94 in). Cross-sectional area: 2,552 mm². Moment of inertia Ix = 4,837.589 cm⁴, Iy = 100.18 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 350 mm | 13.78 in |
| Width (b) | 100 mm | 3.94 in |
| Web thickness (tw) | 4 mm | 0.16 in |
| Flange thickness (tf) | 6 mm | 0.24 in |
| Weight | 20.0 kg/m | 13.45 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 2,552 mm² | 3.956 in² |
| Moment of inertia (Ix) | 4,837.59 cm⁴ | 116.22 in⁴ |
| Moment of inertia (Iy) | 100.18 cm⁴ | 2.41 in⁴ |
| Elastic section modulus (Sx) | 276.43 cm³ | 16.869 in³ |
| Elastic section modulus (Sy) | 20.04 cm³ | 1.223 in³ |
| Plastic section modulus (Zx) | 320.64 cm³ | 19.567 in³ |
| Plastic section modulus (Zy) | 31.35 cm³ | 1.913 in³ |
| Radius of gyration (rx) | 13.77 cm | 5.421 in |
| Radius of gyration (ry) | 1.98 cm | 0.780 in |
15.0 kN·m
15.0 kN
1.74 mm
L/3440