Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 300x300x16x32 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 300x300x16x32 steel profile weighs 180.4 kg/m (121.22 lb/ft), has a depth of 300 mm (11.81 in), flange width 300 mm (11.81 in). Cross-sectional area: 22,976 mm². Moment of inertia Ix = 36,391.927 cm⁴, Iy = 14,408.055 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 300 mm | 11.81 in |
| Width (b) | 300 mm | 11.81 in |
| Web thickness (tw) | 16 mm | 0.63 in |
| Flange thickness (tf) | 32 mm | 1.26 in |
| Weight | 180.4 kg/m | 121.22 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 22,976 mm² | 35.613 in² |
| Moment of inertia (Ix) | 36,391.93 cm⁴ | 874.32 in⁴ |
| Moment of inertia (Iy) | 14,408.06 cm⁴ | 346.15 in⁴ |
| Elastic section modulus (Sx) | 2,426.13 cm³ | 148.052 in³ |
| Elastic section modulus (Sy) | 960.54 cm³ | 58.616 in³ |
| Plastic section modulus (Zx) | 2,795.58 cm³ | 170.598 in³ |
| Plastic section modulus (Zy) | 1,455.1 cm³ | 88.796 in³ |
| Radius of gyration (rx) | 12.59 cm | 4.955 in |
| Radius of gyration (ry) | 7.92 cm | 3.118 in |
15.0 kN·m
15.0 kN
0.23 mm
L/25879