Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 300x250x6x16 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 300x250x6x16 steel profile weighs 75.4 kg/m (50.70 lb/ft), has a depth of 300 mm (11.81 in), flange width 250 mm (9.84 in). Cross-sectional area: 9,608 mm². Moment of inertia Ix = 17,110.708 cm⁴, Iy = 4,167.149 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 300 mm | 11.81 in |
| Width (b) | 250 mm | 9.84 in |
| Web thickness (tw) | 6 mm | 0.24 in |
| Flange thickness (tf) | 16 mm | 0.63 in |
| Weight | 75.4 kg/m | 50.70 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 9,608 mm² | 14.892 in² |
| Moment of inertia (Ix) | 17,110.71 cm⁴ | 411.08 in⁴ |
| Moment of inertia (Iy) | 4,167.15 cm⁴ | 100.12 in⁴ |
| Elastic section modulus (Sx) | 1,140.71 cm³ | 69.611 in³ |
| Elastic section modulus (Sy) | 333.37 cm³ | 20.344 in³ |
| Plastic section modulus (Zx) | 1,243.74 cm³ | 75.898 in³ |
| Plastic section modulus (Zy) | 502.41 cm³ | 30.659 in³ |
| Radius of gyration (rx) | 13.34 cm | 5.254 in |
| Radius of gyration (ry) | 6.59 cm | 2.593 in |
15.0 kN·m
15.0 kN
0.49 mm
L/12168