Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 300x200x4x10 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 300x200x4x10 steel profile weighs 40.2 kg/m (27.01 lb/ft), has a depth of 300 mm (11.81 in), flange width 200 mm (7.87 in). Cross-sectional area: 5,120 mm². Moment of inertia Ix = 9,145.067 cm⁴, Iy = 1,333.483 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 300 mm | 11.81 in |
| Width (b) | 200 mm | 7.87 in |
| Web thickness (tw) | 4 mm | 0.16 in |
| Flange thickness (tf) | 10 mm | 0.39 in |
| Weight | 40.2 kg/m | 27.01 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 5,120 mm² | 7.936 in² |
| Moment of inertia (Ix) | 9,145.07 cm⁴ | 219.71 in⁴ |
| Moment of inertia (Iy) | 1,333.48 cm⁴ | 32.04 in⁴ |
| Elastic section modulus (Sx) | 609.67 cm³ | 37.205 in³ |
| Elastic section modulus (Sy) | 133.35 cm³ | 8.137 in³ |
| Plastic section modulus (Zx) | 658.4 cm³ | 40.178 in³ |
| Plastic section modulus (Zy) | 201.12 cm³ | 12.273 in³ |
| Radius of gyration (rx) | 13.36 cm | 5.262 in |
| Radius of gyration (ry) | 5.1 cm | 2.009 in |
15.0 kN·m
15.0 kN
0.92 mm
L/6503