Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 250x200x5x6 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 250x200x5x6 steel profile weighs 28.2 kg/m (18.94 lb/ft), has a depth of 250 mm (9.84 in), flange width 200 mm (7.87 in). Cross-sectional area: 3,590 mm². Moment of inertia Ix = 4,134.6 cm⁴, Iy = 800.248 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 250 mm | 9.84 in |
| Width (b) | 200 mm | 7.87 in |
| Web thickness (tw) | 5 mm | 0.20 in |
| Flange thickness (tf) | 6 mm | 0.24 in |
| Weight | 28.2 kg/m | 18.94 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 3,590 mm² | 5.564 in² |
| Moment of inertia (Ix) | 4,134.6 cm⁴ | 99.33 in⁴ |
| Moment of inertia (Iy) | 800.25 cm⁴ | 19.23 in⁴ |
| Elastic section modulus (Sx) | 330.77 cm³ | 20.185 in³ |
| Elastic section modulus (Sy) | 80.02 cm³ | 4.883 in³ |
| Plastic section modulus (Zx) | 363.61 cm³ | 22.189 in³ |
| Plastic section modulus (Zy) | 121.49 cm³ | 7.414 in³ |
| Radius of gyration (rx) | 10.73 cm | 4.225 in |
| Radius of gyration (ry) | 4.72 cm | 1.859 in |
15.0 kN·m
15.0 kN
2.04 mm
L/2940