Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 200x150x6x16 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 200x150x6x16 steel profile weighs 45.6 kg/m (30.65 lb/ft), has a depth of 200 mm (7.87 in), flange width 150 mm (5.91 in). Cross-sectional area: 5,808 mm². Moment of inertia Ix = 4,310.042 cm⁴, Iy = 900.302 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 200 mm | 7.87 in |
| Width (b) | 150 mm | 5.91 in |
| Web thickness (tw) | 6 mm | 0.24 in |
| Flange thickness (tf) | 16 mm | 0.63 in |
| Weight | 45.6 kg/m | 30.65 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 5,808 mm² | 9.002 in² |
| Moment of inertia (Ix) | 4,310.04 cm⁴ | 103.55 in⁴ |
| Moment of inertia (Iy) | 900.3 cm⁴ | 21.63 in⁴ |
| Elastic section modulus (Sx) | 431 cm³ | 26.302 in³ |
| Elastic section modulus (Sy) | 120.04 cm³ | 7.325 in³ |
| Plastic section modulus (Zx) | 483.94 cm³ | 29.532 in³ |
| Plastic section modulus (Zy) | 181.51 cm³ | 11.077 in³ |
| Radius of gyration (rx) | 8.61 cm | 3.392 in |
| Radius of gyration (ry) | 3.94 cm | 1.550 in |
15.0 kN·m
15.0 kN
1.96 mm
L/3065