CISC, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 900x500x11x30 CISC in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 900x500x11x30 steel profile weighs 308.0 kg/m (207.00 lb/ft), has a depth of 900 mm (35.43 in), flange width 500 mm (19.69 in). Cross-sectional area: 39,240 mm². Moment of inertia Ix = 622,231.2 cm⁴, Iy = 62,509.317 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 900 mm | 35.43 in |
| Width (b) | 500 mm | 19.69 in |
| Web thickness (tw) | 11 mm | 0.43 in |
| Flange thickness (tf) | 30 mm | 1.18 in |
| Weight | 308.0 kg/m | 207.00 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 39,240 mm² | 60.822 in² |
| Moment of inertia (Ix) | 622,231.2 cm⁴ | 14949.10 in⁴ |
| Moment of inertia (Iy) | 62,509.32 cm⁴ | 1501.79 in⁴ |
| Elastic section modulus (Sx) | 13,827.36 cm³ | 843.801 in³ |
| Elastic section modulus (Sy) | 2,500.37 cm³ | 152.583 in³ |
| Plastic section modulus (Zx) | 14,990.4 cm³ | 914.774 in³ |
| Plastic section modulus (Zy) | 3,775.41 cm³ | 230.391 in³ |
| Radius of gyration (rx) | 39.82 cm | 15.677 in |
| Radius of gyration (ry) | 12.62 cm | 4.969 in |
15.0 kN·m
15.0 kN
0.01 mm
L/442476