CISC, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 650x650x20x50 CISC in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 650x650x20x50 steel profile weighs 596.6 kg/m (400.92 lb/ft), has a depth of 650 mm (25.59 in), flange width 650 mm (25.59 in). Cross-sectional area: 76,000 mm². Moment of inertia Ix = 614,083.333 cm⁴, Iy = 228,890.833 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 650 mm | 25.59 in |
| Width (b) | 650 mm | 25.59 in |
| Web thickness (tw) | 20 mm | 0.79 in |
| Flange thickness (tf) | 50 mm | 1.97 in |
| Weight | 596.6 kg/m | 400.92 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 76,000 mm² | 117.800 in² |
| Moment of inertia (Ix) | 614,083.33 cm⁴ | 14753.35 in⁴ |
| Moment of inertia (Iy) | 228,890.83 cm⁴ | 5499.10 in⁴ |
| Elastic section modulus (Sx) | 18,894.87 cm³ | 1153.041 in³ |
| Elastic section modulus (Sy) | 7,042.79 cm³ | 429.780 in³ |
| Plastic section modulus (Zx) | 21,012.5 cm³ | 1282.267 in³ |
| Plastic section modulus (Zy) | 10,617.5 cm³ | 647.922 in³ |
| Radius of gyration (rx) | 28.43 cm | 11.191 in |
| Radius of gyration (ry) | 17.35 cm | 6.832 in |
15.0 kN·m
15.0 kN
0.01 mm
L/436681