CISC, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 650x650x20x30 CISC in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 650x650x20x30 steel profile weighs 398.8 kg/m (267.98 lb/ft), has a depth of 650 mm (25.59 in), flange width 650 mm (25.59 in). Cross-sectional area: 50,800 mm². Moment of inertia Ix = 409,312.333 cm⁴, Iy = 137,351.833 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 650 mm | 25.59 in |
| Width (b) | 650 mm | 25.59 in |
| Web thickness (tw) | 20 mm | 0.79 in |
| Flange thickness (tf) | 30 mm | 1.18 in |
| Weight | 398.8 kg/m | 267.98 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 50,800 mm² | 78.740 in² |
| Moment of inertia (Ix) | 409,312.33 cm⁴ | 9833.73 in⁴ |
| Moment of inertia (Iy) | 137,351.83 cm⁴ | 3299.88 in⁴ |
| Elastic section modulus (Sx) | 12,594.23 cm³ | 768.550 in³ |
| Elastic section modulus (Sy) | 4,226.21 cm³ | 257.900 in³ |
| Plastic section modulus (Zx) | 13,830.5 cm³ | 843.992 in³ |
| Plastic section modulus (Zy) | 6,396.5 cm³ | 390.340 in³ |
| Radius of gyration (rx) | 28.39 cm | 11.175 in |
| Radius of gyration (ry) | 16.44 cm | 6.474 in |
15.0 kN·m
15.0 kN
0.02 mm
L/291067