CISC, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 600x600x30x60 CISC in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 600x600x30x60 steel profile weighs 678.2 kg/m (455.78 lb/ft), has a depth of 600 mm (23.62 in), flange width 600 mm (23.62 in). Cross-sectional area: 86,400 mm². Moment of inertia Ix = 554,688 cm⁴, Iy = 216,108 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 600 mm | 23.62 in |
| Width (b) | 600 mm | 23.62 in |
| Web thickness (tw) | 30 mm | 1.18 in |
| Flange thickness (tf) | 60 mm | 2.36 in |
| Weight | 678.2 kg/m | 455.78 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 86,400 mm² | 133.920 in² |
| Moment of inertia (Ix) | 554,688 cm⁴ | 13326.38 in⁴ |
| Moment of inertia (Iy) | 216,108 cm⁴ | 5191.99 in⁴ |
| Elastic section modulus (Sx) | 18,489.6 cm³ | 1128.309 in³ |
| Elastic section modulus (Sy) | 7,203.6 cm³ | 439.592 in³ |
| Plastic section modulus (Zx) | 21,168 cm³ | 1291.756 in³ |
| Plastic section modulus (Zy) | 10,908 cm³ | 665.650 in³ |
| Radius of gyration (rx) | 25.34 cm | 9.975 in |
| Radius of gyration (ry) | 15.82 cm | 6.226 in |
15.0 kN·m
15.0 kN
0.02 mm
L/394445